Connectrix MDS: PÄIVITYS EPÄONNISTUI MDS 9706- tai 9710-versiossa, jossa näkyy virheilmoitus bootflash busy; seg fault while mounting bootflash"
摘要: Käyttäjä ei näe bootflash://sup-standby enää, kun NX-OS on päivitetty versiosta 6.2.19 versioon 8.1.1.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
Päivittäminen NX-OS 6.2.19 -versiosta 8.1.1-versioon
Päivityksen jälkeen käyttäjä ei enää näe bootflash://sup-standby.
Tämä toimii seuraavasti:
Toimivassa kytkimessä on seuraavat tiedot:
Muut ongelman oireet voivat olla seuraavat:
Päivityksen jälkeen käyttäjä ei enää näe bootflash://sup-standby.
Tämä toimii seuraavasti:
MDS1# dir bootflash: bootflash:/// bootflash://module-5/ bootflash://sup-1/ bootflash://sup-active/ bootflash://sup-local/
MDS2# dir bootflash: bootflash:/// bootflash://module-6/ bootflash://sup-2/ bootflash://sup-local/ bootflash://sup-standby/ bootflash://module-5/ bootflash://sup-1/ bootflash://sup-active/ bootflash://sup-remote/ <---------------
- ISSU/D epäonnistuu ja näyttöön tulee seuraava virheilmoitus:
Pre-upgrade check failed. Return code 0x4093007E (Issue cannot be done, bootflash is busy). 'segmentation fault' error messages when issuing `sys health check bootflash`: switch# sys health check bootflash Unmount successful... Checking any file system errors...Please be patient... /isanboot/sbin/format-bootflash: line 75: 7598 Segmentation fault $SUDO $E2FSCK -n -v $@ > /dev/null 2> /dev/null done. Remounting bootflash .../isanboot/sbin/format-bootflash: line 62: 7600 Segmentation fault $SUDO /bin/mount $MNT_BOOTFLASH_DIR Failed to mount bootflash bootflash on the affected supervisor is not available switch# dir no such file or directory (invalid server) Logging log outputs: %BOOTVAR-2-AUTOCOPY_STANDBY_MOUNT_FAILED: Autocopy failed to access standby file system via NFS mount.Please, copy the boot images manually to standby bootflash. %SYSMGR-2-LAST_CORE_BASIC_TRACE: : PID 6688 with message non-sysmgr(non-sysmgr) crashed, core will be saved . Core file also generated: `show cores` Module Instance Process-name PID Date(Year-Month-Day Time) ------ -------- --------------- -------- ------------------------- 5 1 non-sysmgr 6688 2017-10-08 07:29:07
原因
Cisco CSCvb93701 on tunnistanut ongelman seuraavasti:
Dokumentoidussa Cisco-ongelmassa:
ISSU/D fails on MDS 9706/9710 with 'bootflash busy' error; seg fault while mounting bootflash CSCvb93701 (see also CSCvf99665)
The system is only affected if it was previously running one of the following NX-OS releases: 6.2(17) - 6.2(19) 7.3(0)D1(1) - 7.3(1)D1(1) 7.3(0)DY(1) - 7.3(1)DY(1) This issue does not apply to any other NX-OS releases on MDS 9706 and 9710 platforms. It does not occur on the MDS 9718 platform.
解决方案
Workaround:
Virheellinen IPv6-aliverkko hallintakäyttöliittymässä aiheuttaa tämän ongelman.
Pyydä palautusapua Dellin teknisestä tuesta.
Virheellinen IPv6-aliverkko hallintakäyttöliittymässä aiheuttaa tämän ongelman.
switch13# show interface mgmt0
mgmt0 is up
Hardware is GigabitEthernet
Address is 2cab.ebfd.4386
Internet address(es):
10.8.96.223/23
::148.125.166.255/0 <--- "0" indicates an invalid subnet
fe80::2eab:ebff:fefd:4386/64
Pyydä palautusapua Dellin teknisestä tuesta.
受影响的产品
Connectrix MDS-9710产品
Connectrix MDS-9706, Connectrix MDS-9710文章属性
文章编号: 000052402
文章类型: Solution
上次修改时间: 21 9月 2023
版本: 4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。