SRM: How to identify that user is connected directly or via gateway server

摘要: How to identify that User is connected directly or via gateway server? Where to check if the test connection is passed but data is not sent to SRS?

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

说明

Symptoms & Causes:
With SRM 4.7.1.0 though the test connection is passed, but sometimes the user is still not able to send the data to SRS via gateway server.  The following steps show how to connect directly and how to connect via gateway server.

Resolution
 
  1. There are two ways to connect to SRS from SRM:
    • Direct connect
    • Secure Gateway
  2. Check the Enable Connectivity checkbox which is by default ‘Direct’ connectivity.
  3. Alternatively, to enable Dell Technologies Connectivity via gateway server, do the following:
  1. Check the Connect Via Gateway Server checkbox.
  2. Type the Primary or Secondary Gateway IP address and the Gateway Port to be used.
  1. Have a valid ELMS license installed and enter a Valid Access Key and PIN.
 
  1. If the test connection shows success but still data is not sent to SRS or connectivity issue with the SCG server then please check the logs.
  1. For Linux or vApp the log location is:  <APG_Install_DIR>/APG/ese/var/log/ESE.log
 
  1. For Windows the log location is:  <APG_Install_DIR>\APG\ESE\data\log\ESE.log
文章属性
文章编号: 000200558
文章类型: How To
上次修改时间: 07 11月 2022
版本:  3
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。