Avamar: How to change Avamar Virtual Edition (AVE) RAM and CPU configuration

摘要: You can adjust the CPU and memory configuration of an Avamar Virtual Edition (AVE) virtual machine after it has been deployed in vCenter. This may be necessary to meet specific performance or sizing requirements. ...

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

說明

The below are the recommended requirements that can be found in the Avamar Virtual Edition (AVE) Installation Guide:

Image dispalys recommended CPU, Memory, Disk space and network connections for Avamar Virtual Environment

In specific requirements, an AVE may need specific configurations such as number of processors or RAM size. It is possible to increase Memory size and number of processors even after the AVE is deployed.

The Following steps can be followed to adjust these configurations for the AVE:

  1. Log in to the vSphere Web Client
  2. Locate the Avamar AVE Virtual Machine (VM).
  3. "Right Click" on the VM
  4. Power --> Shut Down Guest OS
Image shows how to shutdown the Avamar VM in vSphere
  1. "Right Click" on the VM --> Edit Settings
  2. Change CPU and RAM configuration
Image shows how to set resources in vSPhere UI
  1. "Right Click" on the VM
  2. Power --> Power On

 

Note: Always refer to the Avamar Virtual Edition Installation Guide for recommended resource configurations.

受影響的產品

Avamar

產品

Avamar, Avamar Virtual Edition
文章屬性
文章編號: 000019945
文章類型: How To
上次修改時間: 03 10月 2025
版本:  3
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。