Inspiron 7586 Service Manual

Procedure to move the screw mount

This computer supports two solid-state drive form factors:

M.2 2230
M.2 2280

If you are replacing the solid-state drive of a different form factor other than the one removed, see the following procedure to move the location of the screw mount.

Remove the screw mount from the palm-rest and keyboard assembly.
Turn the screw mount to 180 degrees.
Insert the screw mount into the other screw mount slot on the palm-rest and keyboard assembly.
Align the notch on the solid-state drive/Intel Optane memory module with the tab on the solid-state drive slot.
Slide the solid-state drive/Intel Optane memory module firmly into the solid-state drive slot at an angle.
Press the other end of the solid-state drive/Intel Optane memory module and replace the screw (M2x3) that secures the solid-state drive to the palm-rest assembly.

Willkommen

Willkommen bei Dell

Inspiron 7586 Service Manual

Procedure to move the screw mount

Diesen Inhalt bewerten