Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

To create a zone and add members to the zone, use the following commands.

1. Create a zone. CONFIGURATION mode fc zone zonename
2. Add members to a zone. ZONE CONFIGURATION mode member word The member can be WWPN (00:00:00:00:00:00:00:00), port ID (000000), or alias name (word).

Dell(conf)#fc zone z1
                                 Dell(conf-fc-zone-z1)#member 11:11:11:11:11:11:11:11
                                 Dell(conf-fc-zone-z1)#member 020202
                                 Dell(conf-fc-zone-z1)#exit