Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

In addition to filtering routes, you can add routes from other routing instances or protocols to the BGP process. With the redistribute command, you can include ISIS, OSPF, static, or directly connected routes in the BGP process.

• Include, directly connected or user-configured (static) routes in BGP. ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode redistribute {connected | static} [route-map map-name] Configure the map-name parameter to specify the name of a configured route map.
• Include specific ISIS routes in BGP. ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode redistribute isis [level-1 | level-1-2 | level-2] [metric value] [route-map map-name] Configure the following parameters:

  • level-1, level-1-2, or level-2: Assign all redistributed routes to a level. The default is level-2.

  • metric value : The value is from 0 to 16777215. The default is 0.

  • map-name: name of a configured route map.

• Include specific OSPF routes in IS-IS. ROUTER BGP or CONF-ROUTER_BGPv6_ AF mode redistribute ospf process-id [match external {1 | 2} | match internal] [metric-type {external | internal}] [route-map map-name] Configure the following parameters:

  • process-id : the range is from 1 to 65535.

  • match external: the range is from 1 or 2.

  • match internal

  • metric-type: external or internal.

  • map-name: name of a configured route map.