- Notes, cautions, and warnings
- Overview
- System views
- Setting up your Dell Edge Gateway
- Setting up your
operating system
- Windows 10 IoT Enterprise LTSB
- Snappy Ubuntu
Core 15 and 16
- Overview
- Boot up and log in
- Restoring Ubuntu Snappy
- Updating operating system and applications
- Ubuntu Core OS basic functions
- UEFI capsule update
- Watchdog Timer
- Security
- Accessing Snappy Store/Snapweb
- Cloud LED On/Off
- Serial Port
- Minicom
- Expansion IO Module
- Zigbee
- Controller Area Network
- Network Manager – Ubuntu Core 15
- Network Manager – Ubuntu Core 16
- Flashing the BIOS
- Wind River Linux
- System specifications
- I/O Module Overview
- Power Module Overview
- Enclosure Overview
- Setting up the Zigbee dongle
- BIOS defaults
- Other documents you may need
- Contacting Dell
Dell Edge Gateway5000 Series Installation and Operation Manual
Common port mappings
Serial port mapping
| Number | Port type | Connector | Device node |
|---|---|---|---|
| 1 | RS232 | DB9 | COM1 |
| 2 | RS422/485 | 5-pin terminal | COM2 |
| 3 | RS485 | 3-pin terminal | COM3 |
| 4 | RS485 | 3-pin terminal | COM4 |
Edge Gateway I/O module GPIO mapping
The GPIOs on the external I/O Module for the Edge Gateway are behind the PIC microcontroller. The PIC microcontroller is exposed to the host system and to the host OS as a USB-HID device. Software applications developed to communicate with the GPIOs may use the protocol defined in the above set of references to communicate with the GPIO modules.Edge Gateway I/O module PCIe expansion mapping
The PCIe slot on the external I/O module for the Edge Gateway is driven directly from the host PCIe bus. Since PCIe expansion is generic, there are no PCIe device-specific drivers integrated into the Windows 10 IoT Enterprise LTSB OS image. If a specific PCIe card is to be used on this slot, contact the vendor of that PCIe card to verify if they have the required drivers for Windows 10 IoT Enterprise LTSB. Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\