- Notes, cautions, and warnings
- Overview
- System views
- Setting up your Dell Edge Gateway
- Setting up your
operating system
- Windows 10 IoT Enterprise LTSB
- Snappy Ubuntu
Core 15 and 16
- Overview
- Boot up and log in
- Restoring Ubuntu Snappy
- Updating operating system and applications
- Ubuntu Core OS basic functions
- UEFI capsule update
- Watchdog Timer
- Security
- Accessing Snappy Store/Snapweb
- Cloud LED On/Off
- Serial Port
- Minicom
- Expansion IO Module
- Zigbee
- Controller Area Network
- Network Manager – Ubuntu Core 15
- Network Manager – Ubuntu Core 16
- Flashing the BIOS
- Wind River Linux
- System specifications
- I/O Module Overview
- Power Module Overview
- Enclosure Overview
- Setting up the Zigbee dongle
- BIOS defaults
- Other documents you may need
- Contacting Dell
Dell Edge Gateway5000 Series Installation and Operation Manual
Flashing the BIOS
Prerequisites
- Download the latest BIOS file from www.dell.com/support.
- USB 2.0 or USB 3.0 flash drive (4 GB minimum)
- Power off the Edge Gateway.
- On a separate computer, unzip the BIOS update file that you have downloaded from www.dell.com.
- Open the extracted file folder Edge_Gateway5000_1.X.X.
- Copy the BIOS update file labeled as Edge_Gateway5000_1.X.X.exe to a USB flash drive.
- Insert the USB flash drive in one of the available USB ports on the Edge Gateway.
- Power on the Edge Gateway.
- When the Dell logo is displayed on the screen, press F12 to enter the one-time boot screen.
- On the one-time boot screen, select Flash the BIOS .
- On the next screen, select the BIOS file ( Edge_Gateway5000_1.X.X.exe) on the USB key.
- Start the flash process.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\