Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In

Your Dell.com Baskets

Dell Edge Gateway5000 Series Installation and Operation Manual

PDF

Setting up the IO module

  • CAUTION: Before touching anything inside the system, ground yourself by touching an unpainted metal surface. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.
  • NOTE: Install the PCIe expansion card in the IO expansion module before mounting it on wall mount or DIN rail.
  1. Install the PCIe expansion card in the IO expansion module—optional. For more information, see Installing the PCIe card into the IO module .
  2. Attach either wall-mount brackets or a DIN rail mount to the power module as needed.
  3. Remove the screw and the dust cap covering the power module expansion port on the Edge Gateway connector.
    Image: Remove the dust caps
  4. Align the power module guide pins to the power module port on the Edge Gateway and slide the power module toward the Edge Gateway until fully seated.
    Image: Slide the IO module into the Edge Gateway
  5. Ensure the top and bottom latches are locked to secure the module to the Edge Gateway.
    Image: Lock the top and bottom latches
  6. Install the Edge Gateway and the IO module along with the power module at a desired location using a wall-mount bracket or the DIN rail mount. Wall mount bracket
    Wall mount bracket
    DIN rail mount
    DIN rail mount
  7. Connect to a power source, and press the power button.
    Connect power source
    • NOTE: Connect a power cable to the 24 V AC/DC or 19.5 V DC power adapter port on the power module.
    • NOTE: The power adapter and sealed lead-acid battery is sold separately.
    • NOTE: To enable and use the IO expansion module, you must also install the power module.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\