Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell Latitude 7389 2-in-1 Owner's Manual

PDF

Removing the display assembly

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. MicroSD card

    2. SIM card

      • NOTE: To remove both cards if equipped and no need to remove the blank filler.
    3. base cover

    4. battery

    5. WLAN card

    6. WWAN card

  3. Disconnect the :
    1. IR camera and touchscreen cable [1].
    2. Remove the M 2 x 1.7L screws that secure the eDP bracket and lift it away from the computer [2].
    3. Disconnect the eDP cable from the system board [3].
    4. Disconnect th G-sensor and eDP cables [4].
  4. Peel the tapes that secure the antenna cables and un route the cables from the routing clips.
  5. Lift the base of the computer away from the display assembly.
  6. To remove the display assembly:
    • NOTE: Open the Laptop as shown in the illustration above.
    1. Remove the M2.5 x 4.0 screws that secure the display hinge brackets [1].
      • CAUTION: Hold the LCD assembly in place as the screws are removed, to prevent it from falling over and possible damage.
    2. Lift the display assembly away from the computer [2].

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\