Dell Latitude 7390 Owner's Manual

Removing smart card cage

1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Disconnect the battery cable from the connector on the system board.
4. Remove the PCIe SSD card .
5. Remove the SATA SSD.
6. To disconnect the smart card cable:
   1. Disconnect the smart card cable [1].
      NOTE Ensure to gently push the connector, to avoid damage to the smart card head.
   2. Lift the smart card cable that is affixed to the touchpad module [2].
      NOTE Ensure to pull gently to release it with adhesive tape.
   
7. To remove the smart card cage:
   NOTE To identify the number of screws, see screw list.
   1. Remove the M2 x 3 screws (2) that secure the smart card cage to the computer [1].
   2. Slide and lift the smart card cage from the computer [2].