Dell EMC OpenManage Command Line Interface Guide Version 9.5

Omconfig Initialize Virtual Disk

Table 1. omconfig Initialize Virtual DiskThe following table describes the syntax and sample syntaxes for the omconfig Initialize Virtual Disk command.
Description	Initializes a virtual disk.
Syntax	omconfig storage vdisk action=initialize controller=id vdisk=id, where id is the controller ID and virtual disk ID as reported by the omreport command. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage vdisk controller=ID to display the IDs for the virtual disks attached to the controller.
Example to	Initialize virtual disk 4 on controller 1
Example	omconfig storage vdisk action=initialize controller=1 vdisk=4