Dell EMC OpenManage Command Line Interface Guide Version 9.5

Omconfig Set Check Consistency Rate

Table 1. Omconfig Set Check Consistency RateThe following table describes the process to set the check consistency rate.
Description	Sets the check consistency rate.
Syntax	omconfig storage controller action= setcheckconsistencyrate controller=id rate=<0 to 100>, where id is the controller ID as reported by the omreport storage controller command.
Example to	Sets the check consistency rate to 50 on controller 1.
Example	omconfig storage controller action= setcheckconsistencyrate controller=1 rate=50