Dell EMC OpenManage Command Line Interface Guide Version 9.5

Omreport NVMe adapter

The following table describes the syntax for the omreport nvmeadapter commands.

Table 1. omreport NVMe adapter commandThe following table describes the syntax for the omreport nvmeadapter commands and its usage.
Required Command Levels (1, 2, 3) And name=value pair	Optional name=value pairs	Use
omreport storage nvmeadapter		Displays the properties of the NVMe adapters.
	controller=id, where id is the controller number. For example, controller=0.	Displays the properties of all the NVMe adapters on the specified controller.
	controller=id, nvmeid=id, where id is the controller number and the NVMe adapter respectively. For example, controller=0 nvmeid=1.	Displays the properties of the specified NVMe adapter on the specified controller.