Dell EMC OpenManage Command Line Interface Guide Version 9.5

Omconfig Initialize Physical Disk

Table 1. omconfig Initialize Physical DiskThe following table describes the syntax and sample syntaxes for the omconfig Initialize Physical Disk command.
Description	Initializes a physical disk.
Syntax	omconfig storage pdisk action=initialize controller=id pdisk=id, where id is the controller ID and physical disk ID as reported by the omreport command. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.
Example to	Initialize physical disk 4 on controller 1
Example	omconfig storage pdisk action=initialize controller=1 pdisk=1:0:4