Dell EMC OpenManage Command Line Interface Guide Version 9.5

Omconfig Instant Erase Secured Physical Disk

Table 1. omconfig Instant Erase Secured Physical DiskThe following table describes the syntax and sample syntaxes for the omconfig Instant Erase Secured Physical Disk command.
Description	Erases the given encrypted disk. NOTE: This command is applicable only on Micron devices.
Syntax	omconfig storage pdisk action=instantsecureerase controller=id pdisk=<PDISKID>, where id is the controller ID. The <PDISKID> variable specifies the physical disk. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.
Example to	Erase physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers	omconfig storage pdisk action=instantsecureerase controller=1 pdisk=0:3
Example for SAS controllers	omconfig storage pdisk action=instantsecureerase controller=1 pdisk=0:2:3