Dell EMC OpenManage Command Line Interface Guide Version 9.5

Omconfig Offline Physical Disk

Table 1. omconfig Offline Physical DiskThe following table describes the syntax and sample syntax for the omconfig Offline Physical Disk command.
Description	Makes a physical disk offline.
Syntax	omconfig storage pdisk action=offline controller=id pdisk=<PDISKID>, where id is the controller ID. The <PDISKID> variable specifies the physical disk. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller.
Example to	Offline physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2.
Example for SCSI, SATA, and ATA controllers	omconfig storage pdisk action=offline controller=1 pdisk=0:3
Example for SAS controllers	omconfig storage pdisk action=offline controller=1 pdisk=0:2:3