Dell EMC OpenManage Command Line Interface Guide Version 9.5

Omconfig Unblink Virtual Disk

Table 1. omconfig Unblink Virtual DiskThe following table describes the syntax and sample syntaxes for the omconfig Unblink Virtual Disk command.
Description	Unblinks the physical disks included in a virtual disk.
Syntax	omconfig storage vdisk action=unblink controller=id vdisk=id, where id is the controller ID and virtual disk ID as reported by the omreport command. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage vdisk controller=ID to display the IDs for the physical disks attached to the controller.
Example to	Unblink the physical disks in virtual disk 4 on controller 1.
Example	omconfig storage vdisk action=unblink controller=1 vdisk=4