OptiPlex 7060 Tower Service Manual

Installing heat sink

1. Align the screws of the heat sink with the holders on the system board and place the heat sink on the processor [1].
2. Tighten the captive screws to secure the heat sink to the system board [2].
   NOTE

   Tighten the screws in a sequential order (1,2,3,4) as printed on the system board.
   
3. Replace the heat sink fan.
4. Close the front panel door.
5. Install the:
   1. Front bezel
   2. Side cover
6. Follow the procedure in After working inside your computer.