Running the
ePSA Diagnostics
- Invoke diagnostics boot by either of the methods suggested above
- Once on one time boot menu use up/down arrow key to navigate to ePSA
or diagnostics and press <return> key to launch
Fn+PWR will flash diagnostics boot selected on
screen and launch ePSA/diagnostics directly.
- On the boot menu screen, select the Diagnostics option.
- Press the arrow
in the lower-right corner to go to the page listing.
The items detected are listed and will be
tested
- If there are any issues, error codes are displayed.
Note the error code and validation number
and contact Dell.
To run a diagnostic test on a specific device
- Press Esc and click Yes to stop the diagnostic
test.
- Select the device from the left pane and click Run Tests.
- If there are any issues, error codes are displayed.
Note the error code and validation number
and contact Dell.
Data is not available for the Topic