Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Precision 5560 Service Manual

PDF

Installing the display assembly

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the display-assembly cable and display-assembly hinges and provide a visual representation of the installation procedure.

Image: Installing the display assembly

Image: Installing the display-assembly

Steps

  1. Slide the palm-rest and keyboard assembly under the display-assembly hinges.
  2. Align the screw holes on the palm-rest assembly with the screw holes on the right and left display-assembly hinges.
  3. Replace the four screws (M2.5x5.5) and (M2.5x5.5) that secure the left hinge to the system board and the palm-rest and keyboard assembly.
  4. Align the screw holes on the display-assembly cable holder with the screw holes on the palm-rest and keyboard assembly.
  5. Connect the touchscreen cable and camera cable to the display-assembly cable .
  6. Replace the two screws (M1.6x3) that secure the display-assembly cable holder to the palm-rest and keyboard assembly.
    NOTE:Apply gentle torque when tightening the two screws (M1.6x3) to avoid damaging the screw threads.
  7. Align the screw holes on the display-assembly cable bracket with the screw holes on the system board.
  8. Tighten the three captive screws that secure the display-assembly cable bracket to the system board.

Next steps

  1. Install the base cover.
  2. Follow the procedure in After working inside your computer.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\