Removing the solid-state drive1
Prerequisites
- Follow the procedure in
Before working inside your computer.
CAUTION:Solid-state drives are fragile. Exercise care when handling the solid-state drive.
CAUTION:To avoid data loss, do not remove the solid-state drive while the computer is turned on or is in sleep state.
- Remove the
base cover.
About this task
The following image indicates the location of the solid-state drive1 and provides a visual representation of the removal procedure.
Steps
- Remove the screw (M2x2) that secures the solid-state drive thermal bracket and the solid-state drive1 to the system board.
- Slide the solid-state drive thermal bracket from the alignment post and lift it from the system board.
- Slide and remove the solid-state drive1 from the solid-state drive slot.
Data is not available for the Topic