Precision 5560 Service Manual

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type, and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary with the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your computer.
Component	Screw type	Quantity	Screw image
Base cover	M2x3	8
Battery	M2x3 M2x4	4 4
Solid-state drive1	M2x2	1
Solid-state drive2	M2x2	1
Right fan	M2x4	2
Left fan	M2x4	3
Speakers	M2x2	2
I/O board shield	M2x4	2
Type-C bracket	M2x4	2
Right hinge	M2.5x5.5	4
Left hinge	M2.5x5.5	4
Display-assembly cable holder	M1.6x3	2
Display-assembly cable bracket	M2x2	3
Wireless-card bracket	M1.6x3	1
Graphics card-processor thermal shield cover	M2x2	2
System board	M2x4	2
Touchpad	M1.6x2.5 M2x2	4 4