If you are replacing a component, remove the existing component before performing the installation procedure.
CAUTION:Solid-state drives are fragile. Exercise care when handling the solid-state drive.
NOTE:Your computer supports 2 solid-state drive slots. Solid-state drive1 is the primary slot and solid-state drive2 is the secondary slot. If you are installing only one solid-state drive, install the drive to the primary slot. Install the second solid-state drive, if available, to the solid-state drive2 slot.
About this task
The following image indicates the location of the solid-state drive2 and provides a visual representation of the installation procedure.
Steps
Align the notch on the solid-state drive2 with the tab on the solid-state drive slot.
Gently slide the solid-state drive2 into the solid-state drive slot.
Slide the solid-state drive thermal bracket into the alignment post on the system board, and align the screw hole on the solid-state drive thermal bracket with the screw hole on the system board.
Replace the screw (M2x2) that secures the solid-state drive thermal bracket and the solid-state drive2 to the system board.