Dell Precision 3430 Small Form Factor Service Manual

The cable cover for a Dell Precision 3430 Small Form Factor helps protect ports and cables connected to the system.

1. Slide the latch away from the chassis to unlock the cable cover.
2. Pull the tab on the cable release latch and lift the latch away from the cable cover.
3. Lift the tab [1], to release and pull the cable tie from the slot on the cable release latch [2].
4. Align the cable release latch on the system chassis slot [1]. Tighten the single screw to secure the cable release latch to the system chassis [2].
5. Route the cables through the slot of the cable cover [1], and connect them to their respective ports on the system (2). Secure the cable with the cable tie and lock the tab in place [3]. Align the plastic hooks of the cable cover to the slots on the system [4].
   • CAUTION: Take care not to break or bend the delicate plastic hooks.
   
6. Gently press down on the cable cover until it clicks into place (1). Slide the latch towards the chassis (2) to lock the cable cover in place.
   • NOTE: For added security, use the Padlock ring to secure the system.
7. To remove the cable cover:
   1. Slide the latch away from the chassis to unlock the cable cover [1].
   2. Lift the cable cover away from the system chassis [2].