Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

PDF

get fans

Description

Displays the status and attributes of the fans in the storage enclosure that are connected to chassis.
NOTE To use this subcommand, you must have the CMC Login User privilege.

Synopsis 

racadm raid get fans -o -p Status
racadm raid get fans -o

Input

  • -o — The -o is used to display the fault-tolerant status of a enclosure.

Example 

racadm raid get fans -o -p Status
Fan.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
Fan.Slot.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok

racadm raid get fans -o
Fan.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 0
   Speed                            = 4620 RPMS
Fan.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 1
   Speed                            = 4620 RPMS
Fan.Slot.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 2
   Speed                            = 4490 RPMS
Fan.Slot.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 3
   Speed                            = 4560 RPMS
Fan.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 0
   Speed                            = 4670 RPMS
Fan.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 1
   Speed                            = 4670 RPMS
Fan.Slot.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 2
   Speed                            = 4670 RPMS
Fan.Slot.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
   FanOperationalStatus             = Ok
   State                            = Ready
   Name                             = Fan 3
   Speed                            = 4700 RPMS

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\