Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Description

Displays the routing table and the current connections.

To use this subcommand, you must have the Execute Diagnostic Commands privilege.

Synopsis

	racadm netstat

Input

	racadm netstat

Output

Kernel IPv6 routing table
Destination                                 Next Hop                                Flags Metric Ref    Use Iface
::1/128                                     ::                                      U     0      30       1 lo
fe80::200:ff:fe00:d01/128                   ::                                      U     0      0        1 lo
fe80::/64                                   ::                                      U     256    0        0 eth1
ff00::/8                                    ::                                      U     256    0        0 eth1


Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
192.168.0.1     0.0.0.0         255.255.255.0   U         0 0          0 bond0
0.0.0.0         192.168.0.1     0.0.0.0         UG        0 0          0 bond0


Active Internet connections (w/o servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State
tcp        0      0 127.0.0.1:8195          127.0.0.1:52887         ESTABLISHED
tcp        0      0 127.0.0.1:199           127.0.0.1:52174         ESTABLISHED
tcp        0      0 127.0.0.1:52175         127.0.0.1:199           ESTABLISHED
tcp        0      0 127.0.0.1:199           127.0.0.1:52175         ESTABLISHED
tcp        0      0 192.168.0.1:22        192.168.0.1:45106     ESTABLISHED
tcp        0      0 127.0.0.1:52174         127.0.0.1:199           ESTABLISHED
tcp        0      0 127.0.0.1:52887         127.0.0.1:8195          ESTABLISHED