OpenManage Integration for VMware vCenter Version 5.1 User's Guide

View storage inventory information

1. On the OMIVV home page, click Hosts & Chassis > Chassis > Chassis List.
   The Dell EMC Chassis page is displayed.
2. Select a chassis, click the Service Tag link.
   The Overview page is displayed.
3. On the Overview page, click Storage.

   The following information about storage is displayed:

   • Virtual Disks
   • Physical Disks
   • Controllers
   • Enclosures
   • Hot Spares

   For MX chassis, the following information is displayed:

   • Slot Number
   • Slot Name
   • Model
   • Service Tag
   • Firmware version
   • Asset Tag
   • Power State
   • Assignment Mode

   For MX chassis, if you want to view information about drives, click storage sled. The following drive information is displayed in the lower pane:

   • Health
   • State
   • Slot
   • Slot Assignment
   • Disk Name
   • Capacity
   • Bus protocol
   • Media

   If a disk in the PowerEdge MX chassis is unassigned, its slot assignment is shown as NA.

   For M1000e chassis, if you have a storage module, the following storage details are displayed in a grid view without any additional information:

   • Name
   • Model
   • Service Tag
   • IP Address (Link to storage)
   • Fabric
   • Group Name
   • Group IP Address (link to storage group).

   NOTE: When you click a highlighted link under storage, the View table displays the details for each highlighted item. In the view table, if you click each line item, additional information is displayed for each highlighted item.