Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Chassis Management Controller Version 3.10 for Dell EMC PowerEdge VRTX User's Guide

Viewing Advanced WWN or MAC Address Information Using Web Interface

To view WWN/MAC Address Information for each server slot or all servers in a chassis, in the advanced mode:
  1. Click Server Overview > Properties > WWN/MAC The WWN/MAC Summary page displays the WWN/MAC Address Information.
  2. From the View drop-down menu, select Advanced, to view the WWN/MAC Addresses attributes in detailed view. In the WWN/MAC Addresses table displays Server Slot, Fabric, Protocol, WWN/MAC addresses, Partition Status, and the MAC address assignment type — Server assigned, FlexAddress, or I/O Identity MAC. A black check mark indicates the active address type, either server-assigned, chassis-assigned, or remote assigned. MAC.
  3. In the WWN/MAC Addresses table, click Export to save the WWN/MAC addresses locally.
  4. Click the plus icon against a slot or click Expand/Collapse All to expand or collapse the attributes listed for a specific slot or all the slots in the WWN/MAC Addresses table.
  5. From the Server Slot drop-down menu, select All Servers or a specific Slot to view the WWN/MAC Addresses attributes for all servers or servers in specific slots only respectively.
  6. From the Fabric drop-down menu, select one of the fabric types to view details for all or specific type of management or I/O fabric associated with the servers.
  7. From the Protocol drop-down menu, select All Protocols or one of the listed network protocols to view all the MACS or the MACs associated with the selected protocol.
  8. In the WWN/MAC Addresses field, enter the MAC address to view only the slots associated with the specific MAC address.
  9. From the Partition Status drop-down menu, select the status of the partitions to display servers with the selected partition status. If a particular partition is disabled, the status is displayed as Disabled and the row displaying the partition is greyed out.

For information about the fields, see the Online Help.


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\