Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell Chassis Management Controller Version 3.10 for Dell EMC PowerEdge VRTX User's Guide

PDF

Viewing Physical Disk Properties Using the CMC Web Interface

Make sure that physical disks are installed on the chassis.
To view the properties of physical disk drives:
  1. In the left pane, go to Chassis Overview > Storage > Physical Disks. The Properties page is displayed.
  2. To view properties of all the physical disk drives, under the Physical Disks section, click the plus sign.
    • NOTE: The following attributes are displayed for fault-tolerant mode of integrated shared adapters:

      • Active controller — Shared PERC8 (Integrated 1)

      • Redundant/Failover controller — Shared PERC8 (Integrated 2)

      The following attributes are displayed for fault-tolerant mode of external shared adapters:
      • Active controller — Shared PERC8 (SPERC Slot 5)
      • Redundant/Failover controller — Shared PERC8 (SPERC Slot 6)
    You can also use the following filters to view specific physical disk drive's properties:
    • Under the Basic Physical Disks Filter option , from the Group By drop-down menu, select Virtual Disk, Controller, or Enclosure, and then click Apply.
    • Click Advanced Filter, select the values for various attributes, and then click Apply.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\