Skip to main content

Dell G3 3590 Service Manual

Screw list

NOTE When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surface when replacing a component.

NOTE Screw color may vary with the configuration ordered.

Table 1. Screw listScrew list
Component	Secured to	Screw type	Quantity	Screw image
Base cover	Palm-rest and keyboard assembly	M2x7	6	NOTE Screw color may vary depending on the configuration ordered.
Battery	Palm-rest and keyboard assembly	M2x3	2
Solid-state drive	Solid-state drive bracket	M2x3	1
Hard-drive assembly	Palm-rest and keyboard assembly	M2x3	3
Hard-drive bracket	Hard-drive assembly	M3x3	4
Left fan	Palm-rest and keyboard assembly	M2x3	2
Right fan	Palm-rest and keyboard assembly	M2x3	2
Wireless-card bracket	System board	M2x3	1
Touchpad bracket	Palm-rest and keyboard assembly	M2L2 Big Head	7
Power button with fingerprint reader (optional)	Palm-rest and keyboard assembly	M2x3	2
USB 3.1 Type-C port bracket	System board	M2x3	2
Hinge brackets	Palm-rest and keyboard assembly	M2.5x5	4
Hinge brackets	Display panel	M2.5x2.5 Big Head	12
Hinge brackets	Display panel	M2x2.5	2
I/O board	Palm-rest and keyboard assembly	M2x3	2
System board	KB Support	M2L2 Big Head	2