Skip to main content

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

query peer-connection


Description	Queries a storage system to potentially use in a peer connection and shows information about the storage system via the in-band query. The system uses this information to determine how to set up the peer connection. You can use this command to view information about systems you might use in a peer connection before creating the peer connection, or to view information about systems currently in a peer connection before modifying the peer connection. For example, to create a peer connection you must specify a port address on the remote system. You can specify any port address that this command shows as having Reachable Local Links values.
Minimum role	monitor
Syntax	query peer-connection `remote-port-address`
Parameters	`remote-port-address`Specifies the FC WWN or iSCSI IP address of the system to query. IPv4 and IPv6 formats are supported.
Output	Controller A: Controller A. B: Controller B. Storage Controller Code Version Storage Controller firmware version and loader version. Management Controller Code Version Management Controller firmware version and loader version. IPv4 Address Controller network port IPv4 address. Peer Host Name Controller network port IP address in the peer system. IPv6 Address 1-4 Up to four IPv6 addresses configured for use, or Not Configured. Port The port ID. Type FC: FC port. iSCSI: iSCSI port. Unknown: Port type is unknown Port Health Up Down Degraded SFP Issue Unknown Port Address The assigned port address. Reachable Local Links The IDs of ports in the local system linked to ports in the remote system.
Examples	Query the system with an IP address of 192.168.200.22. # query peer-connection 192.168.200.22
Basetypes	peer-connection-info status
See also	create peer-connection delete peer-connection set peer-connection show peer-connections