Skip to main content

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

show peer-connections


Description	Shows information about a peer connection between two systems. You can run this command on either the local or remote system.
Minimum role	monitor
Syntax	show peer-connections [verify-links] `peer-connection-ID`
Parameters	[verify-links] Optional. If a peer connection ID is specified, this parameter displays the ports that can be seen by each port on each peer system. `peer-connection-ID` Optional. Specifies the name or serial number of the peer connection for which to show information. If this parameter is not specified the command shows information for all peer connections.
Output	Peer Connection Name The name of the peer connection. Peer Connection Type The type of ports being used for the peer connection: FC: FC ports. iSCSI: iSCSI ports. Connection Status Online: The systems have a valid connection. Offline: No connection is available to the remote system. Health OK Fault Unknown Health Reason If Health is not OK, this field shows the reason for the health state. Health Recommendation If Health is not OK, this field shows recommended actions to take to resolve the health issue. Local Port The IDs of ports in the local system. Port Address The assigned port address. Remote Port The IDs of ports in the remote system. Reachable Remote Links Shown by the verify-links parameter. The IDs of linked ports in the remote system. Reachable Local Links Shown by the verify-links parameter. The IDs of linked ports in the local system
Examples	Show information for all peer connections. # show peer-connections Show information for peer connection Peer1. # show peer-connections Peer1 Show information for peer connection Peer1 and the ports that can be seen from each port. # show peer-connections Peer1 verify-links
Basetypes	peer-connections status
See also	create peer-connection delete peer-connection query peer-connection set peer-connection