Skip to main content

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

show remote-systems


Description	Shows information about remote systems associated with the local system. This command applies to linear storage only.
Minimum role	monitor
Syntax	show remote-systems [`system`]
Parameters	system Optional. The name or network-port IP address of the remote system about which to show information.
Output	System Name The name of the remote system. System Contact The name of the person who administers the remote system. System Location The location of the remote system. System Information A brief description of the remote system. Vendor Name The vendor name of the remote system. Product ID The product model identifier of the remote system. Product Brand The brand name of the remote system. IP Address Controller A The IP address of the network port in controller A in the remote system. IP Address Controller B The IP address of the network port in controller B in the remote system. Username The name of a user with the manage role in the remote system. Status Uninitialized: This system hasn’t communicated with the remote system. Ready: This system has contacted the remote system and it is ready to use. Connected: This system is transferring data to the remote system. Not Connected: The system is not connected to the remote system. Last Connected Date and time, in the format `year-month-day hour:minutes:seconds` (UTC), when successful communication was last established between the Management Controller in the local system and the Management Controller in the remote system. This value does not indicate when connection status was last determined, and will not be updated if the remote Management Controller is not accessible or if the connection status is Not Connected.
Examples	Show information about remote system System2. # show remote-systems System2
Basetypes	remote-system status
See also	delete remote-system