Dell PowerVault ME4 Series Storage System CLI Guide

(5U84 enclosure)

• 0 : Top
• 1 : Bottom

(2U12/24 enclosure)

• A : Controller A.
• B : Controller B.
• both : Both controllers.
• N/A

• 0: B
• 1: A
• 2: both
• N/A

• For a sensor, its value.
• For overall unit status, one of the status values below.

• OK : The sensor is present and detects no error condition.
• Warning : The sensor detected a non-critical error condition. Temperature, voltage, or current is between the warning and critical thresholds.
• Critical : The sensor detected a critical error condition. Temperature, voltage, or current exceeds the critical threshold.
• Unavailable : The sensor is present with no known errors, but has not been turned on or set into operation because it is initializing. This typically occurs during controller startup.
• Unrecoverable : The enclosure management processor (EMP) cannot communicate with the sensor.
• Unknown : The sensor is present but status is not available.
• Not Installed : The sensor is not present.
• Unsupported : Status detection is not implemented.

• 0: Unsupported
• 1: OK
• 2: Critical
• 3: Warning
• 4: Unrecoverable
• 5: Not Installed
• 6: Unknown
• 7: Unavailable

• controllers
• enclosures
• fan
• iom
• midplane
• power-supplies

• 17: enclosures
• 18: midplane
• 19: controllers
• 20: iom
• 21: power-supplies
• 22: fan

• Temperature
• Voltage
• Current
• Charge Capacity
• Unknown Type

• 0: Temperature
• 1: Current
• 2: Voltage
• 3: Charge capacity
• 4: Unknown Type