Dell PowerVault ME4 Series Storage System CLI Guide

show fans


Description	Shows information about each fan in the storage system. To see information about the fan modules that contain each pair of fans, use the show fan-modules command.
Minimum role	monitor
Syntax	show fans
Output	Name The fan name. Location The fan location in the format Enclosure enclosure-ID- position. The position is as viewed from the back of the enclosure. Status Up Error Off Missing Speed The fan speed (revolutions per minute). Position The fan position, as viewed from the back of the enclosure: Left Right N/A Serial Number (blank): Not applicable. Part Number (blank): Not applicable. Firmware version (blank): Not applicable. The firmware revision of a fan FRU. Hardware version (blank): Not applicable. Health OK Degraded Fault N/A Unknown Reason If Health is not OK, this field shows the reason for the health state. Action If Health is not OK, this field shows recommended actions to take to resolve the health issue
Examples	Show about all fans in the system. # show fans
Basetypes	fan status
See also	show power-supplies