Skip to main content

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

show frus


Description	Shows FRU (field-replaceable unit) information for the storage system. Some information is for use by service technicians.
Minimum role	monitor
Syntax	show frus
Output	Enclosure ID The enclosure ID.
Examples	FRU fields: Name CHASSIS_MIDPLANE: Chassis and midplane circuit board RAID_IOM: Controller module BOD_IOM: Expansion module POWER_SUPPLY: Power supply module DRAWER: Enclosure disk drawer FAN MODULE: Fan module SIDEPLANE: Sideplane Description The FRU description. Part Number The FRU part number. Serial Number The FRU serial number. Revision The hardware revision level. Dash Level The FRU template revision number. FRU Shortname A short description of the FRU. Manufacturing Date The date and time in the format `year-month-day hour:minutes:seconds` when a PCBA was programmed or a power supply module was manufactured. Manufacturing Location The city, state/province, and country where the FRU was manufactured. Manufacturing Vendor ID The JEDEC ID (global manufacturing code) of the manufacturer. FRU Location The location of the FRU in the enclosure. Configuration SN The configuration serial number. FRU Status Absent: The FRU is not present. Fault: The FRU’s health is Degraded or Fault. Invalid Data: The FRU ID data is invalid. The FRU’s EEPROM is improperly programmed. OK: The FRU is operating normally. Power OFF: The FRU is powered off. Original SN For a power supply module, the original manufacturer serial number. Otherwise, N/A. Original PN For a power supply module, the original manufacturer part number. Otherwise, N/A. Original Rev For a power supply module, the original manufacturer hardware revision. Otherwise, N/A. Enclosure ID The enclosure number
Examples	Show information about all FRUs in the system. # show frus
Basetypes	enclosure-fru status