Alienware m15 R7 Service Manual

Installing the memory

If you are replacing a component, remove the existing component before performing the installation process.

NOTE: Up to two memory modules may be installed into this computer.

The following image(s) indicate the location of the memory and provides a visual representation of the installation procedure.

Installing the memory

Align the notch on the memory module with the tab on the memory-module slot.
Slide the memory module firmly at an angle, into the memory-module slot.
Press the memory module down until it clicks into place.
CAUTION: To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components on the memory module.
NOTE: Repeat the steps to install a second memory into your computer.
NOTE: The securing clips return to a locked position. If you do not hear the click, remove the memory module and reinstall it.