Alienware x15 R2 Service Manual

Installing the M.2 2230 solid-state drive

If you are replacing a component, remove the existing component before performing the installation process.

NOTE:The following procedure applies only to computers shipped with an M.2 2230 solid-state drive.

NOTE:The M.2 card installed on M.2 slot will depend on the configuration ordered. Supported card configurations:

The following image(s) indicate the location of the M.2 2230 solid-state drive and provides a visual representation of the installation procedure.

Image: Installing the solid-state drive

Align and place the solid-state drive mounting bracket on the palm-rest and keyboard assembly.
Replace the screw (M2x3) that secures the solid-state drive mounting bracket to the palm-rest and keyboard assembly.
Align the notch on the solid-state drive with the tab on the solid-state drive slot.
Slide the solid-state drive into the solid-state drive slot.
Slide the solid-state drive thermal shield into the solid-state drive slot.
Align the screw hole on the solid-state drive thermal shield with the screw hole on the solid-state drive and palm-rest and keyboard assembly.
Replace the screw (M2x3) that secures the M.2 2230 solid-state drive thermal shield to the solid-state drive and palm-rest and keyboard assembly.