Dell Command | PowerShell Provider Version 2.4 Reference Guide

PDF

SystemConfiguration

Table 1. SystemConfigurationSystemConfiguration
Attribute Name	Description
AnalogDigitalInterfaceModeChannel1	Sets the defined Analog or Digital Interface mode for channel 1. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel2	Sets the defined Analog or Digital Interface mode for channel 2. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel3	Sets the defined Analog or Digital Interface mode for channel 3. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel4	Sets the defined Analog or Digital Interface mode for channel 4. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel5	Sets the defined Analog or Digital Interface mode for channel 5. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel6	Sets the defined Analog or Digital Interface mode for channel 6. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel7	Sets the defined Analog or Digital Interface mode for channel 7. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
AnalogDigitalInterfaceModeChannel8	Sets the defined Analog or Digital Interface mode for channel 8. The following are the possible values: Unused—Channel is unused. ADCInput—Sets the channel mode as Analog-to-Digital Converter (ADC) input. DACOutput—Sets the channel mode as Digital-to-Analog Converter (DAC) output. DACAndADC—Sets the channel mode as DAC output, but can be monitored through ADC input. GPIO—Sets the channel mode as General Purpose Input or Output.
BatteryFuelGauge	This feature controls the battery fuel gauge. The following are the possible values: Enabled—Enabling this feature allows the battery fuel gauge to be activated on touch or swipe. Disabled—Disabling this feature prevents the battery fuel gauge from being activated on touch or swipe.
CanBus	Enables or disables the Controller Area Network (CAN) Bus. The following are the possible values: Enabled Disabled
DisBluetoothRadio	Bluetooth radio stops functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DisOnboardFans	Onboard fans stop functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DisGPSReceiver	GPS receiver stops functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DisOnboardLCDScreen	Onboard LCD screen stops functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DisOnboardLEDs	Onboard LEDs stop functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DisOnboardSpeakers	Onboard speakers stop functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DisOsdBtn	Enables or disables the On-screen Display (OSD) buttons on All-In-One system. The following are the possible values: Enabled Disabled
DisWLANRadio	WLAN radio stops functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DisWWANRadio	WWAN radio stops functioning when stealth mode is enabled. The following are the possible values: Enabled Disabled
DockSupportOnBattery	Enabling DockSupportOnBattery allows you to use the docking station, when AC power is absent, but only when the battery is preceding a certain charge percentage. The percentage may change per battery and per platform. For example, the dock may only be powered when the battery is at 60 percent charge or higher, and when the battery drops below this level (without AC power) the dock loses power. The following are the possible values: Possible values: Enabled Disabled
DustFilter	Enables or disables the BIOS messages for maintaining the optional dust filter installed in the computer. BIOS generates a pre-boot reminder to clean or replace the dust filter based on the interval settings. The following are the possible values: Disabled, 15days, 30days, 60days, 90days, 120days, 150days, 180days.
EmbNic1	Controls the state of on-board LAN controller 1. The following are the possible values: Disabled Enabled EnabledPxe OnWithImageServerBoot EnabledwithRPLBoot EnabledwithISCSIBoot
EmbNic2	Controls the state of on-board LAN controller 2. The following are the possible values: Disabled EnabledPXE Enabled EnabledwithImageServerBoot EnabledwithRPLBoot EnabledwithISCSIBoot
EmbSataRaid	Configures the operating mode of the integrated SATA hard drive controller. The following are the possible values: Disabled—The SATA controllers are hidden. Ata—SATA is configured for ATA mode. Ahci—SATA is configured for AHCI mode. Raid—SATA is configured to support RAID mode (Intel Rapid Restore Technology).
Emmcdevice	Enables or disables the eMMC drive. The following are the possible values: Enabled Disabled
FrontBezelLEDIntensity	Controls the light intensity of system's front bezel LED. The following are the possible values: Disabled Low Medium Full
FrontFan	The following are the possible values: Enabled—When enabled, the front fan utilizes the thermal solution of the system. Disabled—When disabled, thermal solution of the system utilizes only the fan from the back panel.
FingerprintReader	Enables or disables the Fingerprint Reader device. The following are the possible values: Enabled—Fingerprint Reader device is enabled. Disabled—Fingerprint Reader device is disabled.
FingerprintReaderSingleSignOn	Enables or disables the FingerprintReaderSingleSignOn. The following are the possible values: Enabled—FingerprintReaderSingleSignOn is enabled. Disabled—FingerprintReaderSingleSignOn is disabled.
ForcePXEasFirstBootDevice	Enables or disables Preboot Execution Environment (PXE) as the first boot device for all subsequent boots. The following are the possible values: Enabled Disabled
ForcePxeNextBoot	Enables or disables Force PXE on next boot in BIOS. The following are the possible values: Enabled—If enabled, when the BIOS boots next time, the first PXE-capable device is inserted as the first device in the boot sequence. Enabling this value causes this operation on the next boot only, and does not cause a change in the defined boot sequence of the system. The BIOS chooses the first PXE-capable device as the onboard network controller of the system, if present and enabled, or the first bootable network device found in the standard PCI search order of the system, whichever comes first. Disabled—If disabled, the boot override feature is disabled and the system boot sequence is in effect.
FrontPowerButton	Enables or disables the front power button. The following are the possible values: Enabled Disabled
Hdd1FanEnable	Enables or disables the automatic fan controller, an error check of a fan. If a fan is detected, this function is automatically enabled. Disabling the fan requires physical removal of the HDD fan. The following are the possible values: Enabled Disabled
Hdd2FanEnable	Enables or disables the automatic fan controller, an error check of a fan. If a fan is detected, this function is automatically enabled. Disabling the fan requires physical removal of the HDD2 fan. The following are the possible values: Enabled Disabled
Hdd3FanEnable	Enables or disables the automatic fan controller, an error check of a fan. If a fan is detected, this function is automatically enabled. Disabling the fan requires physical removal of the HDD3 fan. The following are the possible values: Enabled Disabled
IgnitionSwitchEnable	Enables or disables the external ignition pin. Disabled by default. The following are the possible values: Enabled Disabled
IgnitionSwitchOnDelay	The delay is displayed in seconds when the power button event is passed to the OS to initiate a boot of the system. Possible values are from (0—21600). By default the value is 5s.
IgnitionSwitchOffDelay	The delay is displayed in seconds untill the power button event is passed to the OS for shutting down the system. Possible values are from (0—21600). By default the value is 5s.
IgnitionSwitchDebounceCycle	De-Bounce Ignition Power Switch cycle time is displayed in milli-seconds. Possible values are from (50—5000). By default the value is 50ms.
IntegratedAudio	Enables or disables the integrated audio controller. The following are the possible values: Enabled Disabled Auto
IntegratedSas	Enables or disables the integrated Serial Attached SCSI (SAS) controller. NOTE: This option affects the SAS RAID controller Only. This controller operates the connectors on the motherboard that are marked SASA and SASB. The following are the possible values: Enabled Disabled
InternalSpeaker	Enables or disables the built-in speaker. The following are the possible values: Enabled Disabled Low Medium High
IoModule	Enables or disables I/O module. The following are the possible values: Enabled Disabled
IoModule 2	Enables or disables I/O module 2. The following are the possible values: Enabled Disabled
IoModule 3	Enables or disables I/O module 3. The following are the possible values: Enabled Disabled
IoModule 4	Enables or disables I/O module 4. The following are the possible values: Enabled Disabled
KbdBacklightTimeoutAc	Configures the time-out value for the keyboard backlight when an AC adapter is plugged into the system. The following are the possible values: 5s—Keyboard backlight stays on for 5 seconds. 10s—Keyboard backlight stays on for 10 seconds. 15s—Keyboard backlight stays on for 15 seconds. 30s—Keyboard backlight stays on for 30 seconds. 1m—Keyboard backlight stays on for 1 minute. 5m—Keyboard backlight stays on for 5 minutes. 15m—Keyboard backlight stays on for 15 minutes. Never—Keyboard backlight always stays on.
KbdBacklightTimeoutBatt	Configures the time-out value for the keyboard backlight when the system is running only on battery power. The following are the possible values: 5s—Keyboard backlight stays on for 5 seconds. 10s—Keyboard backlight stays on for 10 seconds. 15s—Keyboard backlight stays on for 15 seconds. 30s—Keyboard backlight stays on for 30 seconds. 1m—Keyboard backlight stays on for 1 minute. 5m—Keyboard backlight stays on for 5 minutes. 15m—Keyboard backlight stays on for 15 minutes. Never—Keyboard backlight always stays on.
KeyboardBacklightActiveColor	Displays or sets an active color for the keyboard backlight in a rugged system. 6 colors are available: four predefined colors (white, red, green, blue), and two user configurable colors (custom1 and custom2). Active color indicates the color used on startup. Any one of the 6 colors can be chosen as an active color. The following are the possible values: White Red Green Blue Custom1 Custom2
KeyboardBacklightCustom1Color	Configures the Custom1 color by specifying the RGB values by mentioning it in 'R:G:B' format. Each color component value ranges from 0 to 255. Possible values: [0-255]:[0-255]:[0-255]
KeyboardBacklightCustom2Color	Configures the Custom2 color by specifying the RGB values by mentioning it in 'R:G:B' format. Each color component value ranges from 0 to 255. Possible values: [0-255]:[0-255]:[0-255]
KeyboardBacklightEnabledColors	Displays or enables the supported colors for the keyboard backlight in the rugged systems. 6 colors are available: 4 predefined colors (white, red, green, blue), and 2 user-configurable colors (custom1 and custom2). Multiple colors out of the 6 colors can be enabled at the same time. After enabling colors, you can switch among the enabled colors by pressing <Fn+C> keys. Enabling NoColor means that the keyboard backlight is turned off. Possible values: Either combination of, White Red Green Blue Custom1 Custom2 Or NoColor NOTE: If value NoColor is selected, you cannot use <Fn+C> to switch to another keyboard backlight color. The value NoColor cannot be combined with any other color.
KeyboardBacklightOnAc	Disables the fade if an AC adapter is plugged in. For example, if you have set the back light to 25 percent using KeyboardIllumination, and the system is on AC power, then the keyboard backlight remains at 25 percent regardless of internal keyboard or touch pad activity. This feature is in effect only if the Keyboard backlight is enabled. The following are the possible values: Enabled—Keyboard backlight fades after 10 seconds of inactivity. Disabled—Disables the timer that fades the backlight after 10 seconds of inactivity if the system is running on AC power.
KeyboardIllumination	This field lets you configure the keyboard illumination brightness percentage. The keyboard automatically illuminates when the internal keyboard, touchpad, or pointstick are used. The following are the possible values: Auto—Sets the illumination based on ambient light level. Disabled—Turns off keyboard illumination. 25—Sets the brightness level to 25 percent. Dim—Sets the brightness level to 50 percent. 75– Sets the brightness level to 75 percent. Bright—Sets the brightness level to 100 percent.
LiquidCooler1	Enables or disables the liquid cooler 1. The following are the possible values: Enabled—Enables the liquid cooler 1. Disabled—Disables the liquid cooler 1.
LiquidCooler2	Enables or disables the liquid cooler 2. The following are the possible values: Enabled—Enables the liquid cooler 2. Disabled—Disables the liquid cooler 2.
LptMode	Determines how the parallel port on the docking station operates. The following are the possible values: Disabled—Port is disabled. At—Port is configured for IBM AT compatibility. Ps2—Port is configured for IBM PS2 compatibility. Ecp—Extended Capability Port protocol.
M2PcieSsd0	Enables or disables M2 PCIE SSD 0. The following are the possible values: Enabled Disabled
M2PcieSsd1	Enables or disables M2 PCIE SSD 1. The following are the possible values: Enabled Disabled
M2PcieSsd2	Enables or disables M2 PCIE SSD 2. The following are the possible values: Enabled Disabled
M2PcieSsd3	Enables or disables M2 PCIE SSD 3. The following are the possible values: Enabled Disabled
Microphone	Enables or disables the internal or external microphone. The following are the possible values: Enabled Disabled
MEMSSensors	Enables or disables the Micro Electro Mechanical Sensors. The following are the possible values: Enabled Disabled
MmioAbove4Gb	Enables or disables decoding of 64-bit capable devices in more than 4 GB address space only if the system supports 64-bit PCI decoding. The following are the possible values: Enabled Disabled
Minisas0	Enables or disables the Minisas drive 0. The following are the possible values: Enabled Disabled
Minisas1	Enables or disables the Minisas drive 1. The following are the possible values: Enabled Disabled
Minisas2	Enables or disables the Minisas drive 2. The following are the possible values: Enabled Disabled
Minisas3	Enables or disables the Minisas drive 3. The following are the possible values: Enabled Disabled
Nfc	Enables or disables the Near Field Computing (Nfc) device. The following are the possible values: Enabled Disabled
OnboardUSBNIC	Configures the state of the onboard secondary, unmanaged Network Interface Card (NIC). The following are the possible values: Enabled Disabled Enabled with PXE
OptionalBootSequence	Allows or prevents the installation of the Windows operating system on client systems with more than one operating system volume. The following are the possible values: Enabled—Allows the installation of the Windows operating system on client systems with more than one operating system volume. Disabled—Prevents the installation of the Windows operating system on client systems with more than one operating system volume. NOTE: By default, this option is disabled to maintain compatibility with existing installation tools; however, this option can be changed if more than one operating system volume is present on the client system.
PciAllocationPriority	Allocates PCI resources, buses, memory-mapped I/O (MMIO) space, and I/O space. The following are the possible values: Equal—Allocates equal amount of memory to all the resources when two CPUs are installed. CPU1—Allocates larger amount of device-specific memory, which reduces the usable memory in 32-bit operating systems.
PciMmioSpaceSize	Allocates a part of the memory to the PCI Memory Mapped I/O (MMIO). It allows reserving large or small device-specific memory regions to decrease or increase the usable memory on systems with a 32-bit operating system. The following are the possible values: Small—Allocates a small region of memory to PCI memory mapped I/O. Large—Allocates a large region of memory to PCI memory mapped I/O. This reserves the large device-specific memory regions, but reduces the amount of usable memory in 32-bit operating system.
PcibusCount	Sets the maximum number of PCI bus counts for the system. The following are the possible values: 64 128 256
PowerButton	Enables, disables, or partially disables the power button. The following are the possible values: Enabled Disabled Partial disable
PowerButtonOverride	This option allows you to configure the waiting time to forcibly shut down the system. The following are the possible values: 4s 10s
SfpNic	Enables or disables Small Formfactor Pluggable (SFP) device. The following are the possible values: Disabled—Disables the SFP device. Enabled—Enables the SFP device. EnabledPxe—Enables the SFP device with PXE support.
Sata0	Enables or disables the first SATA drive controller. The following are the possible values: Enabled Disabled
Sata1	Enables or disables the second SATA drive controller. The following are the possible values: Enabled Disabled
Sata2	Enables or disables the third SATA drive controller. The following are the possible values: Enabled Disabled
Sata3	Enables or disables the fourth SATA drive controller. The following are the possible values: Enabled Disabled
Sata4	Enables or disables the fifth SATA drive controller. The following are the possible values: Enabled Disabled
Sata5	Enables or disables the sixth SATA drive controller. The following are the possible values: Enabled Disabled
Sata6	Enables or disables the seventh SATA drive controller. The following are the possible values: Enabled Disabled
Sata7	Enables or disables the eighth SATA drive controller. The following are the possible values: Enabled Disabled
Sata8	Sets SATA port 8 to off or auto. The following are the possible values: Enabled Disabled
Serial1	Configures the first (or only) built-in serial port. The following are the possible values: Disabled Com1 Com2 Com3 Com4 COM1_BMC BMCSERIAL BMCLAN RAC RS232 RS422 RS485 Auto
Serial2	Configures the second (if available) built-in serial port. The following are the possible values: Disabled COM2 COM4 RS232 RS422 RS485 Auto
Serial3	Configures the third (if available) built-in serial port. The following are the possible values: Disabled RS232 RS422 RS485 Auto
Serial4	Configures the fourth (if available) built-in serial port. The following are the possible values: Disable RS232 RS422 RS485 Auto
Serial5	Configures the fifth (if available) built-in serial port. The following are the possible values: Disabled Auto
Serial6	Configures the sixth (if available) built-in serial port. The following are the possible values: Disabled Auto
SignOfLifeByLogo	This option indicates that, during POST the power button has been pressed by displaying the customized logo. The following are the possible values: Enabled Disabled
SmartErrors	Controls whether hard drive errors for integrated drives are reported during system startup. The following are the possible values: Enabled Disabled
StealthMode	Configures the Dell Stealth Mode features. Sets the operation mode of the system elements. If enabled, the system elements operate in the pre-programmed stealth mode. If disabled, the system elements operate in the normal mode. The following are the possible values: Enabled Disabled Following are the system elements that have effect of stealth mode on them: DisOnboardLEDs DisOnboardLCDScreen DisOnboardSpeakers DisOnboardFans DisBluetoothRadio DisGPSReceiver DisWLANRadio DisWWANRadio DisOnboardLEDs
TabletButtonIllumination	Sets the Tablet Button illumination level. The following are the possible values: Off 25pct 50pct 75pct 100pct
TabletButtonsTimeoutAc	This feature defines the illumination timeout value for the tablet buttons when an AC adapter is connected to the system. The buttons are illuminated when they are pressed, and remains illuminated for that specified timeout period. The tablet button illumination timeout value works when button illumination is enabled. If you select Never, the buttons remain illuminated whenever the system is connected to the AC adapter. The following are the possible values: Never 5s 10s 15s 30s 1m 5m 15m
TabletButtonsTimeoutBatt	This feature defines the illumination timeout value for the tablet buttons when the system is running on battery power. The buttons are illuminated when they are pressed, and remains illuminated for that specified timeout period. The tablet button illumination timeout value works when button illumination is enabled. If you select Never, the buttons remain illuminated whenever the system is running on battery power. The following are the possible values: Never 5s 10s 15s 30s 1m 5m 15m
TbtPcieModeAutoSwitch	The following are the possible values: Enabled Disabled
TelemetryAccessLvl	This feature controls the type of telemetry for data support. The following are the possible values: Disabled—No telemetry Basic—Flash and diagnostics only Enhanced—Flash, diagnostics, and boot event Full—All telemetry
Touchscreen	Enables or disables the touchscreen. The following are the possible values: Enabled Disabled
UefiNwStack	This option is disabled by default. If enabled, UEFI Networking protocols are installed/available, allowing pre-OS and early OS networking features to use the enabled NICs. This option may be used without turning on PXE. The following are the possible values: Enabled—Enables speed boot time, limits network security, and network access capability. Select the UefiNwStack option to run diagnostics and recovery of the system Disabled—Disables speed boot time, network security, and restricts network access capability. AutoEnable—This option is not displayed when the UefiNwStack is enabled by platform customization. Enables speed boot time, limits network security, and increases network access capability. Select the UefiNwStack option to enable multiple applications to work on boot (BitLocker works with limitations). SelectiveEnable—The speed of the boot time reduces, limits network security, and increases network access capability. Select the UefiNwStack option for BitLocker to work on boot.
UnobtrusiveMode	Enables or disables the toggling of light emissions using hotkey Fn+B. The following are the possible values: Enabled—Pressing Fn+B will toggle light emissions from the system. Disabled—Pressing Fn+B keys has no effect and will not toggle light emissions from the system.
UsbPowerShare	Configures the USB PowerShare feature behavior. The following are the possible values: Enabled—Charges the external devices, such as phones and laptop music players, using the stored system battery when the system is turned off or in sleep mode. This feature works only if: The device is connected through the USB PowerShare port on the laptop. The system is connected to an AC power source. The battery charge is less than 50 percent. Disabled—Turns off this feature, and devices attached to the USB PowerShare port will not be charged when the system is in a sleep mode or turned off.
Vmdnvmepcie0	Enables or disables the VMD for Front NVMe Port (PCIE0). The following are the possible values: Enabled Disabled
Vmdnvmepcie1	Enables or disables the VMD for Front NVMe Port (PCIE1). The following are the possible values: Enabled Disabled
Vmdnvmepcie0cpu1	Enables or disables the VMD for Front NVMe Port (PCIE0-CPU1). The following are the possible values: Enabled Disabled
Vmdnvmepcie1cpu1	Enables or disables the VMD for Front NVMe Port (PCIE1-CPU1). The following are the possible values: Enabled Disabled
Vmdpcieslot	Enables or disables the VMD for PCIe Slot. The following are the possible values: Enabled Disabled
WatchdogTimer	Enables or disables the system to reboot or reset when the watchdog time expires. The following are the possible values: Enabled Disabled
WdtOsBootProtection	Enables or disables Watchdog OS Boot Protection. The following are the possible values: Enabled—The application configures a chipset-based timer to reset or shutdown the system. Disabled—The application cannot configure a chipset-based timer to reset or shutdown the system. By default the Application Watchdog Timer is disabled.
WlanRegionCode	Sets the WLAN code for specific region. The following are the possible values: rtw—(Rest of the World) Sets the WLAN region code for the rest of the world. This option is selected by default. na—(North America (FCC)) Sets the WLAN region code for Canada and the United States. eur—(Europe) Sets the WLAN region code for Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, Netherlands, Norway, Poland, Portugal, Slovakia, Spain, Sweden, Switzerland, Turkey, and United Kingdom. jpn—(Japan) Sets the WLAN region code for Japan only. aus—(Australia) Sets the WLAN region code for Australia, New Zealand, Saudi Arabia, South Africa, UAE, and Vietnam. chn—(China, South Asia) Sets the WLAN region code for China and India. twn—(Taiwan) Sets the WLAN region code for Colombia, Peru, and Taiwan. idn—(Indonesia) Sets the WLAN region code for Indonesia only.