Return\Error Codes | Description | Resolution |
---|---|---|
0 | Command execution was successful. | None |
1 | A reboot was required from the execution of an operation. | Reboot the system to complete the operation. |
2 | An unknown application error has occurred. | None |
3 | The current system manufacturer is not Dell. | Dell Command | Update can only be run on Dell systems. |
4 | The CLI was not launched with administrative privilege. | Invoke the Dell Command | Update CLI with administrative privileges. |
5 | A reboot was pending from a previous operation. | Reboot the system to complete the operation. |
6 | Another instance of the same application (UI or CLI) is already running. | Close any running instance of Dell Command | Update UI or CLI and retry the operation. |
7 | The application does not support the current system model. | Contact your administrator if the current system model in not supported by the catalog. |
8 | No update filters have been applied or configured. | Supply at least one update filter. |
Return\Error Codes | Description | Resolution |
---|---|---|
100 | While evaluating the command line parameters, no parameters were detected. | A command must be specified on the command line. |
101 | While evaluating the command line parameters, no commands were detected. | Provide a valid command and options. See Command line interface reference section, for more information. |
102 | While evaluating the command line parameters, invalid commands were detected. | Provide a command along with the supported options for that command. See Command line interface reference section, for more information. |
103 | While evaluating the command line parameters, duplicate commands were detected. | Remove any duplicate commands and rerun the command. See Command line interface reference section, for more information. |
104 | While evaluating the command line parameters, the command syntax was incorrect. | Ensure that you follow the command syntax: /<command name>. See Command line interface reference section, for more information. |
105 | While evaluating the command line parameters, the option syntax was incorrect. | Ensure that you follow the option syntax: -<option name>. See Command line interface reference section, for more information. |
106 | While evaluating the command line parameters, invalid options were detected. | Ensure to provide all required or only supported options. See Command line interface reference section, for more information. |
107 | While evaluating the command line parameters, one or more values provided to the specific option was invalid. | Provide an acceptable value. See Command line interface reference section, for more information. |
108 | While evaluating the command line parameters, all mandatory options were not detected. | If a command requires mandatory options to run, provide them. See Command line interface reference section, for more information. |
109 | While evaluating the command line parameters, invalid combination of options were detected. | Remove any mutually exclusive options and rerun the command. See Command line interface reference section, for more information. |
110 | While evaluating the command line parameters, multiple commands were detected. | Except for /help and /version, only one command can be specified in the command line. |
111 | While evaluating the command line parameters, duplicate options were detected. | Remove any duplicate options and rerun the command. See Command line interface reference section, for more information. |
112 | An invalid catalog was detected. | Ensure that the file path provided exists, has a valid extension type, is a valid SMB, UNC, or URL, does not have invalid characters, does not exceed 255 characters and has required permissions. See Command line interface reference section, for more information. |
113 | While evaluating the command line parameters, one or more values provided exceeds the length limit. | Ensure to provide the values of the options within the length limit. See Dell Command | Update CLI commands section for more information. |
Return\Error Codes | Description | Resolution |
---|---|---|
500 | No updates were found for the system when a scan operation was performed. | The system is up to date or no updates were found for the provided filters. Modify the filters and rerun the commands. |
501 | An error occurred while determining the available updates for the system, when a scan operation was performed. | Retry the operation. |
502 | The cancellation was initiated, Hence, the scan operation is canceled. | Retry the operation. |
503 | An error occurred while downloading a file during the scan operation. | Check your network connection, ensure there is Internet connectivity and Retry the command. |
Return\Error Codes | Description | Resolution |
---|---|---|
1000 | An error occurred when retrieving the result of the apply updates operation. | Retry the operation. |
1001 |
The cancellation was initiated, Hence, the apply updates operation is canceled. |
Retry the operation. |
1002 | An error occurred while downloading a file during the apply updates operation. | Check your network connection, ensure there is Internet connectivity, and retry the command. |
Return\Error Codes | Description | Resolution |
---|---|---|
1505 | An error occurred while exporting the application settings. | Verify that the folder exists or have permissions to write to the folder. |
1506 | An error occurred while importing the application settings. | Verify that the imported file is valid. |
Return\Error Codes | Description | Resolution |
---|---|---|
2000 | An error occurred when retrieving the result of the Advanced Driver Restore operation. | Retry the operation. |
2001 | The Advanced Driver Restore process failed. | Retry the operation. |
2002 | Multiple driver CABs were provided for the Advanced Driver Restore operation. | Ensure that you provide only one driver CAB file. |
2003 | An invalid path for the driver CAB was provided as in input for the driver install command. | Ensure that the file path provided exists, has a valid extension type, is a valid SMB, UNC, or URL, does not have invalid characters, does not exceed 255 characters and has required permissions. See Command line interface reference section, for more information. |
2004 | The cancellation was initiated, Hence, the driver install operation is canceled. | Retry the operation. |
2005 | An error occurred while downloading a file during the driver install operation. | Check your network connection, ensure there is Internet connectivity, and retry the command. |
2006 | Indicates that the Advanced Driver Restore feature is disabled. | Enable the feature using /configure -advancedDriverRestore=enable |
2007 | Indicates that the Advanced Diver Restore feature is not supported. | Disable FIPS mode on the system. |
Return\Error Codes | Description | Resolution |
---|---|---|
2500 | An error occurred while encrypting the password during the generate encrypted password operation. | Retry the operation. |
2501 | An error occurred while encrypting the password with the encryption key provided. | Provide a valid encryption key and Retry the operation. See Command line interface reference section, for more information. |
2502 | The encrypted password provided does not match the current encryption method. | The provided encrypted password used an older encryption method. Reencrypt the password. |
Return\Error Codes | Description | Resolution |
---|---|---|
3000 | The Dell Client Management Service is not running. | Start the Dell Client Management Service in the Windows services if stopped. |
3001 | The Dell Client Management Service is not installed. | Download and install the Dell Client Management Service from the Dell support site. |
3002 | The Dell Client Management Service is disabled. | Enable the Dell Client Management Service from Windows services if disabled. |
3003 | The Dell Client Management Service is busy. | Wait until the service is available to process new requests. |
3004 | The Dell Client Management Service has initiated a self-update install of the application. | Wait until the service is available to process new requests. |
3005 | The Dell Client Management Service is installing pending updates. | Wait until the service is available to process new requests. |