Dell EMC Metro node 7.0.1 Online Help

Manually registering an initiator

1. From the GUI main menu, do one of the following:
   1. In a metro node Local:
      1. Select Provision Storage.
      2. In the View by drop-down, select Ports.
   2. In a metro node Metro:
      1. Select Provision Storage.
      2. In the Provision on drop-down, select the cluster of the port.
      3. In the View by drop-down, select Ports.
2. In the Initiators view, click Register Initiator Manually.
   The Register Initiators Manually dialog box is displayed, type a meaningful name for the initiator.
3. Select the host type.
4. Type the Port WWN.
   Ensure that you type a valid Port WWN. You can cut and paste into this field to avoid errors.
5. Type the Node WWN.
6. Click OK.
   A message displays to indicate the result of the operation.
7. Click Close.
   The initiator is now visible in the Initiators view.