Issue ID | Functional area | Description | Workaround |
---|---|---|---|
148591 | Upgrading an earlier version of ESXi to ESXi 7.x | Upgrading an earlier version of ESXi to ESXi 7.x fails with iSM VIB installed. In VMware vSphere 7.0, 32-bit userworld support is deprecated. For more information, see the Deprecation of 32-bit Userworld Support section in VMware vSphere 7.0 Release Notes and Known issues section in VMware vSphere 7.x on Dell EMC PowerEdge Servers Release Notes. | Before upgrading an earlier version of ESXi to ESXi 7.0, uninstall the 32-bit iSM VIB corresponding to iSM v3.5.0 or earlier on the hypervisor. |
Not available | Non-functional iSM-Windows remote management commands | When the small footprint CIM broker (SFCB) configuration is set to read-only mode in the VMware ESXi operating system, iSM-Windows remote management (WinRM) commands such as iDRACHardreset, EnableInBandSNMPTraps do not function. | On VMWare ESXi 7.x operating system, use the Invoke-iDRACHardReset command line utility to perform the iDRAC Hardreset operation. |
Not available | iDRAC Access via Host OS | The iDRAC Access via Host OS feature is not supported on VMware ESXi operating systems. | Not applicable |
Not available | Local Racadm | When Local Racadm set is disabled through iDRAC interfaces:
|
Not applicable |
Not available | Lifecycle Controller logs | EventID for Lifecycle Controller logs replicated to operating system log will be 0 for some of the past events. | Not applicable |
Not available | In-band SNMP Trap | TrapID for In-band SNMP Traps will be 0 for some of the past traps. | Not applicable |
87572 | iDRAC Hardreset | When iDRAC Hardreset is disabled in iDRAC and you perform an iDRAC Hardreset operation from the hypervisor operating systems like VMware ESXi, the result indicates success although iDRAC is not reset. | Not applicable |
160283 | iSM command-line utility | When any iSM command-line utility running on the VMware ESXi operating system is interrupted, you can not remove the iSM VIB using the same terminal. | Use another terminal to remove the iSM VIB. |