Inspiron 22-3280 Service Manual

Procedure

1. Peel off the tape that secures the display cable to the connector on the system board.
2. Using your fingertips, push the securing clips on the display cable inwards and disconnect it from the system board.
3. Disconnect the display-backlight cable and touch-screen cable (optional) from the display panel.
4. Remove the eight screws (M3x5) that secure the display-assembly base to the display assembly.
   
5. Place the display-assembly base in its upright position.
6. Push the display panel away from the display-assembly base.
7. Slide the display cable and the touch-screen cable (optional) through the slots on the display-assembly base.
8. Lift the display panel off the display-assembly base.
   
9. You are left with the display panel.