Dell EMC OpenManage Deployment Toolkit Version 6.1 Command Line Interface Reference Guide

PDF

Blinking And Unblinking Virtual Disks

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for blinking or unblinking a physical disk associated with a virtual disk.

Table 1. Blinking And Unblinking Virtual DisksThe following table describes the RAIDCFG options, parameters, and pre-defined arguments for blinking or unblinking a physical disk associated with a virtual disk.
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
-vd -vd=id ac=blink -c=id or vdisk vdisk=id action=blink controllerid=id	NA	NA	Blinks the physical disks associated with the specified virtual disk on the specified controller. Example: A:>raidcfg -vd -vd=2 -ac=blink -c=2 RAIDCFG Command successful!
-vd -vd=id ac=unblink -c=id or vdisk vdisk=id action=blink controllerid=id	NA	NA	Unblinks the physical disks associated with the specified virtual disk on the specified controller. Example: A:>raidcfg -vd -vd=2 -ac=blink -c=2 RAIDCFG Command successful!