Dell EMC OpenManage Deployment Toolkit Version 6.1 Command Line Interface Reference Guide

PDF

Configuring Physical Disk State

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for configuring the physical disk state to online or offline.

CAUTION: Setting a physical disk online or offline may result in data loss. Either complete an automatic rebuild of the physical disk or initiate a consistency check of the virtual disk after an online task completes.

Table 1. Configuring Physical Disk StateThe following table describes the RAIDCFG options, parameters, and pre-defined arguments for configuring the physical disk state to online or offline.
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
-ad -ac=online -ad\|-pd= ch:targ:encl -c=id or adisk action=online adisk\|pdisk=channel:target:enclosure controllerid=id	NA	NA	Sets the array disk state to online. Example: A:>raidcfg -ad -ac=online -ad=0:1 -c=2
-ad -ac=offline -ad\|-pd= ch:targ:encl -c=id or adisk action=offline adisk\|pdisk=channel:target:enclosure controllerid=id	NA	NA	Cancels the rebuild of the physical disk associated with a specified virtual disk. Example: A:>raidcfg -ad -ac=offline -ad=0:1 -c=2