OptiPlex 7050 Tower Owner's Manual

Environmental Conditions

Table 1. Temperature, Shock, Vibration
Temperature	M.2 2280 form factor
Operating ¹ Non-operating ²	0–70º C -10–85º C
Temperature Gradient ³ Operating Non-operating	30º C/hr (Typical) 30º C/hr (Typical)
Humidity Operating Non-operating	5–95% 5–95%
Shock and Vibration	Range
Shock ⁴ Operating Non-operating	1500 G / 0.5 ms 230 G / 3 msec
Vibration ⁵ Operating Non-operating	2.17 G _RMS (5–800Hz) Max 3.13 G _RMS (5–800Hz) Max

NOTES:

Operating temperature is targeted for 70º C.
Please contact your Intel representative for details on the non-operating temperature range.
Temperature gradient measured without condensation.
Shock specification assume the device is mounted securely with the input vibration applied to the drive-mounting screws. Stimulus may be applied in the X,Y, or Z axis shock specification is measured using Root Mean Squared (RMS) value.
Vibration specifications assume the device is mounted securely with the input vibration applied to the drive-mounting screws. Stimulus may be applied in the X, Y, or Z axis. Vibration specificities is measured using RMS value.