- Notes, cautions, and warnings
- About this document
- PowerEdge XE2420 system overview
- Initial system setup and configuration
- Pre-operating system management applications
- System Setup
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- System cover
- Drives
- Power supply unit
- Cooling fan
- Cooling fan backplane
- Drive backplane
- Primary drive bay assembly
- Control panel
- Cable routing
- PERC
- Air shroud
- Intrusion switch module
- System memory
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the GPU riser 2
- Installing the GPU riser 2
- Removing GPU from GPU riser
- Installing the GPU into the GPU riser
- Removing the GPU riser 1
- Installing the GPU riser 1
- Removing the NVME riser
- Installing the NVME riser
- Removing the interposer
- Installing the interposer
- Removing the expansion card from the interposer
- Installing the expansion card into the interposer
- Processor and heat sink
- Optional IDSDM module
- Micro SD card
- BOSS riser and M.2 module
- Network daughter card
- System battery
- Optional internal USB memory key
- Power interposer board
- System board
- Trusted Platform Module
- Jumpers and connectors
- Technical specifications
- Chassis dimensions
- System weight
- Processor specifications
- PSU specifications
- Supported operating systems
- Cooling fans specifications
- System battery specifications
- Expansion card riser specifications
- Memory specifications
- Storage controller specifications
- Drive specifications
- Ports and connectors specifications
- Video specifications
- Environmental specifications
- System diagnostics and indicator codes
- Getting help
- Documentation resources
