- Notes, cautions, and warnings
- About this document
- Dell PowerEdge XE8640 system overview
- Technical specifications
- Chassis dimensions
- System weight
- Processor specifications
- PSU specifications
- Cooling fan specifications
- Supported operating systems
- System battery specifications
- Expansion card riser specifications
- Memory specifications
- Storage controller specifications
- Drives
- GPU Specifications
- Ports and connectors specifications
- Video specifications
- Environmental specifications
- Initial system setup and configuration
- Pre-operating system management applications
- System Setup
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- GPU fan
- System cover
- Front top cover
- Air shroud
- Drives
- Removing a drive blank
- Installing a drive blank
- Removing a drive carrier
- Installing the drive carrier
- Removing the drive from the drive carrier
- Installing the drive into the drive carrier
- Removing an EDSFF E3.S drive blank
- Installing an EDSFF E3.S drive blank
- Removing an EDSFF E3.S drive from the drive carrier
- Installing an EDSFF E3.S drive into the drive carrier
- Removing an EDSFF E3.S drive carrier
- Installing an EDSFF E3.S drive carrier
- Drive backplane
- PERC module
- Cable routing
- Cooling fans
- System memory
- Processor and heat sink module
- Expansion cards and expansion card risers
- Intrusion switch
- Optional OCP card
- LOM card and rear I/O board
- Optional BOSS-N1 module
- Removing the BOSS-N1 module blank
- Installing the BOSS-N1 module blank
- Removing the BOSS-N1 shroud
- Installing the BOSS-N1 shroud
- Removing the BOSS-N1 card carrier, M.2 SSD module and BOSS-N1 card
- Installing the BOSS-N1 card, M.2 SSD module, BOSS-N1 card carrier
- Removing the BOSS-N1 cage
- Installing the BOSS-N1 cage
- Power supply unit
- System battery
- Control panel
- Versabay board (VSB)
- System board
- System board tray
- LAAC GPU tray
- Power distribution board (PDB)
- Trusted Platform Module
- Jumpers and connectors
- System diagnostics and indicator codes
- System board diagnostic LED indicators
- Enhanced Preboot System Assessment
- Getting help
- Documentation resources
Dell PowerEdge XE8640 Installation and Service Manual
About this document
This document provides an overview about the system, information about installing and replacing components, diagnostic tools, and guidelines to be followed while installing certain components.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\