- Notes, cautions, and warnings
- About this document
- Dell PowerEdge XE9640 system configurations and features
- System configurations - front view for PowerEdge XE9640
- System configurations - rear view for PowerEdge XE9640
- System configurations - inside view for PowerEdge XE9640
- Air and Liquid Cooling Infrastructure Requirements
- Locating the Express Service Code and Service Tag
- System information label
- Rail sizing and rack compatibility matrix
- Technical specifications
- Chassis dimensions
- System weight
- Processor specifications
- PSU specifications
- Cooling fan specifications
- Supported operating systems
- System battery specifications
- Expansion card riser specifications
- Memory specifications
- Storage controller specifications
- Drives
- GPU Specifications
- Leakage behavior specifications
- Ports and connectors specifications
- Video specifications
- Environmental specifications
- Initial system setup and configuration
- Pre-operating system management applications
- System Setup
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Optional front bezel
- System cover
- Cooling fans
- Cable cover
- Fan board
- Drives
- Drive backplane
- Optional BOSS-N1 module
- Versabay board (VSB)
- Storage tray
- Cable routing for Intel GPU Configurations
- Cable routing for NVIDIA GPU Configurations
- Power supply unit
- System memory
- Turtle shell
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers for Intel GPU configuration
- Installing the expansion card risers for Intel GPU configurations
- Removing the expansion card risers for NVIDIA GPU configuration
- Installing the expansion card risers for NVIDIA GPU configurations
- Removing expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Lower brace cover
- Processor and Direct Liquid Cooling module
- Intrusion switch
- System battery
- Trusted Platform Module
- Optional OCP NIC card
- System board
- Removing the system board
- Installing the system board
- Sliding out the system board tray for Intel GPU configurations
- Sliding in the system board tray for Intel GPU configurations
- Removing the system board tray for Intel GPU configurations
- Installing the system board tray for Intel GPU configurations
- Sliding out the system board tray for NVIDIA GPU configurations
- Sliding in the system board tray for NVIDIA GPU configurations
- Removing the system board tray for NVIDIA GPU configurations
- Installing the system board tray for NVIDIA GPU configurations
- LOM card and rear I/O board
- Control panel
- Manifold module
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Dell PowerEdge XE9640 Installation and Service Manual
About this document
This document provides an overview about the system, information about installing and replacing components, diagnostic tools, and guidelines to be followed while installing certain components.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\